Lorex SG7015SX Accessory Color PIR Motion Sensor Camera

Description

The Lorex SG7015SX Accessory Color PIR Motion Sensor Camera is a high-quality and reliable camera designed for use with Lorex observation systems such as the Lorex SG250 series. Suited primarily for indoor use, this unit is constructed within a durable ABS (Acrylonitrile Butadiene Styrene) plastic housing, and features built-in PIR (Passive InfraRed) motion sensors that automatically bring a trouble location to full-screen display. With good resolution and light sensitivity, the Lorex SG7015SX is ideally suited to home and business security applications or other situations requiring 24-hour monitoring, especially when motion detection is of major concern.

This accessory camera utilizes a 0.25-inch color CCD (charge-coupled device) image sensor, with a 3.6-millimeter fixed lens that allows 512 by 492 effective pixels. The SG7015SX has a good resolution of 330 horizontal TVL (TV lines) and can receive a usable picture at a minimum lighting level of 0.5 Lux. The SG7015SX features a built-in electronic automatic shutter with a speed ranging from 1/60 to 1/100,000 of a second, as well as a built-in speaker and microphone to allow for two-way intercom-style audio. This unit is powered from the monitor via the connecting cable, and has an operating temperature of -14 to 122 degrees Fahrenheit.

Technical Features:

• Sensitivity: 0.5 Lux in B/W
• Lens: 3.6-millimeter fixed
• Horizontal resolution: 330 TVL
• Operating temperatures: -14 to 122 degrees Fahrenheit
• Dimensions: approximately 2 x 3 x 3.33 inches (W x D x H)

The Lorex SG7015SX accessory camera is a great way to expand your Lorex observation system's coverage area. Quick and easy to install, this Lorex camera comes completely assembled and includes a metal mounting bracket for wall, ceiling or table mounting applications. Users should note that the CCD sensor may become permanently damaged if exposed to long hours of direct sunlight or halogen light, so the camera should not be mounted or pointed directly at the sun or other bright-light sources.

About Surveillance Camera Technical Features
Lux rating is the measurement used to indicate how sensitive a camera is to light, and stands for the level of light reflected off a piece of paper by a candle from one meter away. Thus a sensitivity of three Lux would mean a camera could generate an acceptable picture of a piece-of-paper-sized object that was illuminated by the equivalent of three candles from one meter away. The lower the Lux level, the better the camera's ability to work in low-light conditions. The camera's resolution should be greater than or equal to the resolution supported by the system's recorder or monitor. The S/N, or signal to noise ratio, is an important measure of a camera's quality. A poor camera, low-light conditions or poor wiring causes "noise" which consumes processing power and disk space. A camera with a wide dynamic range is ideal, especially for recording areas in which both indoor and outdoor light are present. CCD (charge-coupled device) sensors provide high-quality images that are less susceptible to noise. CMOS (complimentary metal-oxide semiconductor) sensors offer less image quality, but are usually more cost-effective and energy efficient.